Featured Orthopedic & Trauma Implants Range
Engineered for precise anatomical contouring, superior fixation, and bio-compatible longevity across Kingdom-wide clinical facilities.
Anterior Cervical Plate Screw Instrument Set ACDF Spinal Fixation System
Inquire Now
CE ISO Titanium Anterior Cervical Locking Plate Model 7400 Multi-Sized
Inquire Now
Titanium Anterior Cervical Locking Plate System for Cervical Spondylosis
Inquire Now
Manual Orthopedic Surgical Instruments Anterior Cervical Plate Instrument Kit
Inquire Now
Orthopedic Trauma Implants 3.5mm Calcaneal Circumferential Locking Plate
Inquire Now
Distal Lateral Tibia Locking Plate Titanium Anatomical Bone Plate 3.5mm
Inquire NowBiomechanical Whitepaper: Olecranon Locking Compression Plating Systems
Proximity fracture management of the proximal ulna—specifically complex olecranon fractures (Mayo Type II, Type III, and comminuted intra-articular fractures)—presents a distinct biomechanical challenge for orthopedic trauma surgeons across the Kingdom of Saudi Arabia. Historically, tension band wiring (TBW) served as the standard of care for simple, non-comminuted transverse olecranon fractures. However, high clinical hardware prominence rates, loss of fixation under early elbow mobilization, and high revision rates have driven a structural paradigm shift toward pre-contoured Olecranon Locking Compression Plate (LCP) Systems.
As a leading international manufacturer and exporter supplying surgical institutions in Riyadh, Jeddah, Dammam, and across all Ministry of Health (MOH) regions, our engineering frameworks prioritize fixed-angle stability, anatomical fit, and dynamic compression capabilities. Manufactured using medical-grade Titanium Alloy (Ti-6Al-4V ELI / ASTM F136) and ISO 5832-1 Stainless Steel, our Olecranon Locking Plate Systems provide superior torsional resistance and pull-out strength required for complex periarticular reconstruction.
Anatomical Design & Engineering Innovations
Exploring the metallurgical and anatomical features that make our olecranon plates the preferred choice for trauma surgeons.
Anatomical Pre-Contouring
Plates are anatomically pre-shaped to conform to the proximal ulna's complex morphology, eliminating intraoperative bending and reducing internal stress concentration along the meta-diaphyseal junction.
Polyaxial & Fixed-Angle Locking
Features proximal olecranon head screw configurations designed to cluster 2.7mm/3.5mm screws into the olecranon tip, securely anchoring small articular fragments without penetrating the trochlear notch.
Tapered Low-Profile Edges
Extremely thin proximal plate profiles (1.5mm - 2.0mm) reduce hardware prominence beneath the thin subcutaneous layer of the elbow, directly diminishing post-operative pain and hardware removal surgeries.
Biomechanical Matrix & System Specifications
Comprehensive technical comparison of Olecranon Locking Plate options available for Saudi healthcare procurement.
| Specification Parameter | Standard Olecranon LCP (3.5mm) | Extra-Articular Dual Plating System | Low-Profile Mini-Olecranon System |
|---|---|---|---|
| Primary Indication | Mayo Type IIA/IIB Fractures & Transverse Fractures | Comminuted Mayo Type III & Monteggia Fracture-Dislocations | Pediatric Trauma & Thin-Subcutaneous Profiles |
| Material Composition | Ti-6Al-4V ELI / 316L Stainless Steel | Titanium Alloy Grade 23 (ELI) | Titanium Alloy Grade 5 / ISO 5832-11 |
| Plate Thickness | 2.8mm Shaft / 1.8mm Head tapering | 2.0mm Parallel Double Plating | 1.5mm Ultra-Low Profile |
| Screw Compatibility | 3.5mm Locking / Cortical, 2.7mm Proximal | 2.7mm Locking & 3.5mm Dynamic Screws | 2.4mm / 2.7mm Multi-Directional Locking |
| Hole Configurations | 2, 4, 6, 8, 10, 12, 14 Holes (Left/Right) | 4, 6, 8, 10 Holes (Symmetrical) | 3, 5, 7, 9 Holes |
| SFDA Registration | Cleared (MDEA Authorized) | Cleared (MDEA Authorized) | Cleared (MDEA Authorized) |
Localized Application Scenarios across Saudi Healthcare Facilities
The healthcare infrastructure of Saudi Arabia—driven by the ambitious targets of Saudi Vision 2030 and managed under the centralized procurement frameworks of NUPCO (National Unified Procurement Company)—demands implants that meet stringent clinical efficacy standards while accommodating specific regional trauma profiles.
High-Velocity Motor Vehicle Accidents (MVAs)
High-speed vehicular trauma along major transport arteries like King Fahd Road in Riyadh or the Haramain Highway connecting Jeddah and Makkah often results in severe polytrauma. Intra-articular comminuted fractures of the elbow require olecranon locking plates with long diaphyseal extensions (8 to 14 holes) to bridge defect zones, ensure rigid anatomical alignment, and facilitate early active rehabilitation.
Geriatric Osteoporotic Fracture Management
With an expanding aging demographic across the Gulf Cooperation Council (GCC) region, low-energy falls among elderly patients present weak, osteopenic bone structures. Standard non-locking plates frequently suffer screw pull-out. Our fixed-angle olecranon locking plate system provides an essential "fixed-angle construct," acting as an internal fixator that relies on the screw-plate thread interface rather than friction against compromised bone.
Specialized Military & Defense Trauma Centers
Serving specialized hospitals such as the King Fahd Armed Forces Hospital in Jeddah and Ministry of National Guard Health Affairs (MNG-HA) centers, our sterile, color-coded anodized titanium plating sets provide rapid intraoperative selection, enhanced corrosion resistance, and total biomechanical reliability under extreme operating conditions.
Desert Climate & Sterilization Stability
Our sterilization tray packaging and anodized titanium surface treatments are specially tested to withstand extreme environmental humidity fluctuations and thermal stresses typical during logistics transport to remote health sectors in the Southern Region (Asir, Jazan) and Northern Borders.
Saudi Arabia Orthopedic Trends: Vision 2030 & SFDA Compliance
The medical device landscape in the Kingdom of Saudi Arabia is undergoing rapid modernization. Importers, distributors, and foreign manufacturers must adhere to strict regulatory parameters enforced by the Saudi Food and Drug Authority (SFDA). As an established global exporter, our manufacturing plants comply fully with SFDA GHAD (Global Harmonization Working Party) registration protocols and Medical Device Establishment Authorization (MDEA).
- SFDA MDMA (Medical Device Marketing Authorization): All Olecranon Locking Plate Systems delivered to Saudi Arabian distributors carry verified SFDA MDMA certificates, ensuring rapid customs clearance and immediate hospital onboarding.
- NUPCO Centralized Tender Readiness: Our standardized product coding, barcode integration (GS1 standards), and packaging align seamlessly with NUPCO's joint purchasing schedules for public MOH hospitals, University Hospitals, and Security Forces Hospitals.
- Localization & OEM/ODM Supply Chains: Supporting Saudi Vision 2030's healthcare localization objectives, we collaborate with Saudi medical distributors to provide custom labeling, localized surgical technique guides in Arabic and English, and inventory buffer programs in major Saudi logistics hubs.
- Rigorous ISO 13485 & MDSAP Certification: Produced under ISO 13485:2016 and Medical Device Single Audit Program (MDSAP) certified cleanroom environments, guaranteeing zero-defect surface finishes and micro-grain structural homogeneity.
Global Manufacturing Strength & Exporter Excellence
Partnering with us grants Saudi healthcare providers and orthopedic distributors direct access to tier-1 manufacturing capabilities without intermediary overheads. Our high-precision 5-axis CNC machining centers enable micro-meter tolerances on locking screw threads and plate contours.
5-Axis CNC Precision
Machined from single solid blocks of certified aerospace-grade titanium alloy, ensuring maximum fatigue life under repetitive dynamic elbow loads.
Type II Anodization
Advanced electrochemical surface anodization enhances fatigue strength, drastically reduces friction, and eliminates cold welding (galling) between screw head and plate hole.
Complete Surgical Instrumentation
Supplied with complete, ergonomically balanced stainless steel instrument trays featuring quick-coupling drill sleeves, torque-limiting screwdrivers, and anatomical benders.
Frequently Asked Questions (FAQ) for Saudi Buyers
Addressing technical, regulatory, and commercial procurement queries from Saudi healthcare institutions.
Elevate Orthopedic Trauma Outcomes in Saudi Arabia
Partner directly with a certified global manufacturer and exporter of Olecranon Locking Compression Plate Systems. Contact our Middle East export team today for SFDA documentation, technical specs, and commercial distributor pricing.